English | Deutsch | German | Italian | Pусский | Française | French | Englisch | Inglese

 

LiPo Battery LP105575 2P 3.7V 10Ah for Flow Detector

LiPo Battery LP105575 2P 3.7V@10Ah provides persuasive power to Flaw Detector, enabling Flaw Detectors high performance and customized set-up to meet the measurement requirements of manufacturing technicians. It significantly reduces the burden of technical staff work,all favorite aw sizing techniques are included, such as DGS/AVG, DAC, TGC, and AWS. It is essential tool int the technical detection.

It Recognizes more and inspects more complex industrial objects with a high pulsed voltage; users can deal with many applications:

• General component inspection • Pipeline Weld

• Complex geometries

• Forgings and Castings

• Aircraft composites delamination • Corrosion mapping inspection

• On-site thickness pro-ling For efficient weld inspection, Proceq is offering both focused and unfocused PA scans.

And the two channels allow inspecting parts of large thickness up to 100 mm in one pass, in the fast check axial and circumferential welds, with defect monitoring, excellent defect size and characterization, inspection of 6-350 mm thick components, and so on to be fully applied.what’s more, On-board shear-wave cancellation and shear-wave straightening tools improve data quality and detection probability.
Also, the 3D scan plan in the link software helps create inspection programs and analysis results, seamlessly connect the instrument to PC software. It can save the detected data and fast set-up with Wizards and option specifics. You can see the dimensions and condition of the object on the equipment screen.

The Flaw Detector is rugged , compact and lightweight.It is easier to use with single hand operation, easier to carry anywhere, and easier connect with the Ethernet service. LiPo Battery LP105575 2P are a vital part of the Flaw Detector because of the high capacity and rechargeable performance.

Battery Type LiPo Battery
Part Number LP105575
Voltage @ Capacity 3,7V @ 10Ah
Configuration 1S2P
Wires AWG 22, 100mm x 2pcs
Connector JST PHR-2
Protection Circuit Overdischarge Trip Voltage 3.0V
Thermistor (NTC) NO
Dimension 75 x 55 x 20,0mm
Charge Temperature 0°C to +45°C
Disharge Temperature -20°C to +60°C
Storage Temperature -20°C to +45°C

 

Similar batteries:

LP115274 2P 3,7V@10.4Ah 74*52*22mm

LP105068 2P 3,7V@8Ah 68*50*20mm

 

Fill out my online form.
Home | About Us | Battery | Hot news | Support | Applications | Contact Us | Sitemap
© 2002 - 2016 LiPol Battery Co., Ltd. All rights reserved